Three Grouped Dwellings on R20/R40 Lot (Triplex) – 3D Bird’s Eye

The 3D Bird’s Eye view shows you the development from above.

You can also view the  2D Ground Footprint2D Bird’s Eye and 3D Ground Footprint of this example.

Use the interactive slider to compare overlayed changes between the previous and proposed development standards by clicking and sliding the arrows left or right. Detailed information of the changes between the previous and proposed development standards can be viewed using the hover images below or downloaded as a pdf.

Note: The numbered information used applies to this comparison example only.

Comparison Slider – Previous vs Proposed Development Standards

Click and slide the arrows slowly left and right to view the design overlay comparisons. Please note some changes are subtle when viewed in this format.

Comparison Hover – Previous Development Standards

Hover your mouse or click on a number to view detailed information.

*Number seven is only linked once regardless of multiple numbers on the hover image.

1
Average lot size of 220m2 per dwelling required – therefore only 3 grouped dwellings are permitted.
2
Maximum building height of 2 storeys permitted.
3
Street setback of 4 metres required – if the building is staggered then part of the building can come forward to a minimum of 2 metres provided a compensating area of open space is provided behind the 4 metre setback line (known as the average setback).
4
Average lot size of 220m2 per dwelling required – therefore only 3 grouped dwellings are permitted.
5
One single storey boundary wall is permitted on the side or rear boundary – provided the wall is a maximum height of 3.5 metres, an average height of 3 metres and is not longer than 2/3 the length of the boundary behind the front setback line.
6
Rear setbacks are calculated for each wall depending on the length and height of the wall and whether the wall includes large windows – the wall can be as close as 1 metre to the boundary.
7
2 resident bays per dwelling are required if the site is further than 800 metres from a train station or 250 metres from a high frequency bus route (measured in a straight line) = 6 bays required (most often provided in double garages or carports for this type of development).
8
1 visitor bay per 2 dwellings is required = 2 bays. Visitor bays may be constructed in the verge.
9
45% of the property needs to be left as open space – this open space can include driveways, uncovered car parking and bin areas, and some patios and alfresco areas. Often there is little area left for trees and other planting.
10
The previous framework provides little ability to prevent the removal of trees or require the planting of trees.

Comparison Hover – Proposed Development Standards 

Hover your mouse or click on a number to view detailed information.

*Number seven is only linked once regardless of multiple numbers on the hover image.

1
Average lot size of 220m2 per dwelling required – therefore only 3 grouped dwellings are permitted.
2
Maximum building height of 2 storeys permitted.
3
Street setback of 4 metres required - no averaging of the setback allowed.
4
Side setbacks are calculated for each wall, depending on the length and height of the wall and whether the wall includes large windows – the wall can be as close as 1 metre to the boundary.
5
One single storey boundary wall is permitted on one side boundary only – for a maximum of 50% of the boundary behind the front setback line. No rear boundary walls are permitted.
6
Rear setbacks of 2 metres are required at the ground floor level and 3 metres at the upper floor level, when the dwelling is 2 storeys - rear boundary walls are not permitted.
7
2 resident bays per dwelling are required if the site is further than a walkable distance of 800 metres from a train station or 200 metres from a bus stop = 6 bays required (likely to be provided in double garages or carports for this type of development).
8
No visitor bays are required for this type of development – therefore no construction of visitor bays in the verge, leaving more area for trees and planting.
9
20% of each strata lot needs to be set aside as landscape area. The landscape area needs a minimum dimension of 2 metres and cannot be used for driveways, uncovered car parking and bin areas, and patios and alfresco areas. The use of paving and decking in landscape areas will be restricted.
10
There are specific requirements for the planting of small, medium and large tress – the number of which is relative to the size of the landscape area.